17102 TStE355 steel plate/sheet/ Supply from stock
We can produce 17102 TStE355 steel palte,17102 TStE355 sheet,17102 TStE355 coil,17102 TStE355 Steel Strips,17102 TStE355 round bar,17102 TStE355 flat bar.Supply from stock.
17102 TStE355 steel palte Specifications:50mm-4500mm(width)*0.08mm-1000mm(thickness).
17102 TStE355 Steel sheet Specifications:50mm-4500mm(width)*0.08mm-1000mm(thickness).
17102 TStE355 Steel coil Specifications: 50mm-4500mm(width)*0.08mm-1000mm(thickness).
17102 TStE355 Steel Strips Specifications:50mm-4500mm(width)*0.08mm-1000mm(thickness).
DIN 17102 TStE355 steel plate/sheet for fine-grain structural steels normalised rolled steels
DIN 17102 TStE355 steel plate/sheet,DIN 17102 TStE355 steel plate/sheet, under DIN standard, we can regard TStE355 steel plate/sheet as fine-grain structural steels, normalised rolled steels.DIN 17102 TStE355 is mainly used as ine-grain structural steels, normalised rolled steels.
DIN 171022 TStE355 steel plate/sheet is ine-grain structural steels, normalised rolled steel plates/sheets specially manufactured for different types of welded constructions, from base material, resistant to heat and tough for low temperatures.And it can be used for pressure boilers, storing tanks both movable and standing, high pressure pipes, bridges, masts, tethers, etc.
| T StE 355 DIN17102 MATERIAL# 1.0456 |
Comparison of steel grades | ||
| UNE36081 | AE 355 KT | ||
| EN 10025-3 | S355NL | ||
| UN | Fe E 355 KT N | ||
| NFA36 201 | E355FP | ||
| BS1449 | 50 EE | ||
DIN TStE355 steel Chemical analysis
| Chemical elements | C max | Si max | Mn max | P max | S max. | Cu max | Cr max | Ni max | V max | Nb max | Al min |
| %,by mass | 0.18 | 0.50 | 0.90-1.65 | 0.025 | 0.020 | 0.55 | 0.30 | 0.50 | 0.12 | 0.05 | 0.02 |
DIN TStE355 steel Mechanical properties
| thickness | Yield Strength ReH [N/mm2] transv.min. | Tensile Strength Rm [N/mm2] transv. | Fracture Elongation [%]transv. min. | Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J] |
| t≤ 16mm t >16mm | 355 345 | +20 KV 40J 0 KV 34J -10 KV 30J -20 KV 27J -30 KV 23J -40 KV 20J -50 KV 16J | ||
| t < 3mm t ≥ 3mm | 470-630 | |||
| Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm | 22 |
TStE 355 steel plates specially manufactured for different types of welded constructions, from base material, resistant to heat and tough for low temperatures.Some of its applications can be: pressure boilers, storing tanks both movable and standing, high pressure pipes, bridges, masts, tethers, etc.
17102 TStE355 Mechanical properties
17102 TStE355 Heat treatment
17102 TStE355 Machining
